One of the most surprising aspects of the GEN-X Floor Care Robots are how easy they are to use.  Intellibot has used advanced technology not only to improve cleaning and reduce cost, but to make the GEN-X as easy as, or even easier to use, than a walk-behind or ride on.  No specialized skills or training is required, and even inexperienced users can be up and running in a matter of minutes. 

The first thing operators will notice is that the GEN-X does not require a key...no more wasting time making copies and wondering where the key went!  A power button turns the machine on, and a personalized password is entered on the touch screen to access the machine. The touch screen is almost completely icon-based, guiding the user through all functions regardless of language or skill level.  Help menus provide additional guidance, and users can be restricted to certain functions for added safety and security. 

Filling the scrubber with water and cleaning solution is easy to do, thanks to the single fluid tank and wide-opening lid of the GEN-X.  Simply flip open the top of the machine and fill according to the solution's instructions.  Once the machine has been prepped. the operator uses Manual Mode to transport the robot to a designated starting position.  In manual mode, the touch screen is used to control the speed and direction of the robot, and to turn on the vacuum motor and brush motors. A touch-sensitive strip on the bottom of the ergonomic-handle engages the drive wheels, reducing strain and adding precision.  Once in position, the operator selects the route to clean and Advanced Navigation takes over.

The first thing operators will notice is that the GEN-X does not At the end of the shift, draining and cleaning the robot is equally simple.  An on-board drain hose is extended, and a single valve drains the solution tank.  Opening the tank door gives easy access to the filter baskets and pleated metal filter that remove larger debris.  Debris down to 5 microns are trapped in the cartridge filters, easily accessed at the rear of the machine.  A wrench is stored between the filters for easy access, and with the housings removed the internal cartridges can quickly be swapped out. 

Even the battery pack is designed to be easy to use.  An external port on the rear of the robot is provided for the battery charger connection. At the end of a shift, the operator simply drives the GEN-X back to it's storage location and plugs in the charger.  The battery pack can even be quickly swapped out using the optional Battery Exchange Kit.